New trim
New trim and boots at walls and penetrations in the same finish as the panels.
Metal Roofing
Metal Roof Replacement Tenafly, NJ
A Tenafly roofer can tear off an old metal roof, re-cover it with new metal or replace a shingle roof with metal, after checking the framing and decking underneath. One call to (551) 355-3330 reaches a nearby roofer who replaces metal roofs.
Replacement comes up once rust or wear has spread past what patches and new fasteners can fix. Widespread rust holes, a worn-out finish and hundreds of stripped fastener holes mean the metal has done its job. Older galvanized roofs with little coating left are the common candidates.
Replacement can mean a full tear-off, a re-cover or panel by panel work. A full tear-off removes the old panels and trim so the purlins or deck can be inspected and repaired, then new metal goes on. A re-cover, or retrofit, installs new metal over the old panels on new sub-framing, which is common on shops and large buildings.
Plenty of homeowners replace an old shingle roof with metal rather than more shingles. Depending on code and deck condition, the old shingles are either removed or covered. It helps to know what is on the roof now, how old it is and whether it has ever been covered over.
Depending on what the roofer finds, metal roof replacement in Tenafly, NJ can go hand in hand with metal roof installation and metal roof repair.
Need metal roof replacement in Tenafly? Call (551) 355-3330 and describe the problem to a roofer who works in Tenafly.
Call nowThe process
How metal roof replacement works
A metal roof replacement is planned around what is under the old roof.
Assess the old roof
The roofer counts rust-through spots, checks the finish and inspects the purlins or decking from inside the attic or building. This decides tear-off, re-cover or partial panel replacement.
Plan the new roof
Tear-off, re-cover or metal over shingles is chosen, along with the new panel system, gauge and finish. The new panels are ordered cut to length.
Tear off
The crew unscrews and lifts off the old metal, stacking it for recycling. Only as much roof is opened as can be covered the same workday.
Restore the deck
Framing and sheathing damaged by old leaks are replaced before new metal goes on. This step is skipped on a re-cover, which is why the structure is checked first.
Put on the new roof
High-temperature underlayment, new trim, panels, closures and flashing go on in order from the eaves up. Every edge gets new matching trim.
What is included
What metal roof replacement includes
Deck repair
The base under the roof is made sound for a straight, solid roof.
Tear-off
The worn roof is stripped down to the framing and taken for recycling.
Metal panels
The new metal system replace the old roof.
Re-cover option
A retrofit re-cover avoids a tear-off when the structure checks out.
Related service
Metal Roof Panel Replacement Tenafly, NJ
Panel replacement is the middle ground between a patch and a full metal roof replacement. The damaged panel is unscrewed, the laps on either side are freed and a new panel of the same profile is lapped in and fastened. Standing seam panel swaps are possible but slower, since the seams on both sides have to be opened.
For a Tenafly building with one or two bad panels, panel replacement is often the sensible step. Color matching is the main limit, since new paint looks brighter than weathered panels. Too many swaps, and a full reroof is the smarter route.
Related service
Metal Roof Over Shingles Tenafly, NJ
Putting a metal roof over shingles means installing new metal on top of one existing layer of asphalt shingles instead of tearing them off. Where code permits, the roofer adds underlayment or furring strips over the shingles and fastens the metal through to the deck.
What you give up is a look at the deck. A roofer in Tenafly should check the attic for rot and soft spots before recommending it, and the shingles must lie flat enough for the panels. Any sign of rot, or a second layer of shingles, tips the decision to tear-off.
Local help
Metal Roof Replacement Near Me
Around Tenafly, metal reroofs range from rusted farm buildings to houses getting their first standing seam roof. Across Tenafly and nearby communities including Cresskill, Englewood, Englewood Cliffs and Demarest, metal roofs that went decades without fastener work are the usual replacement jobs, and the right approach depends on what the old roof is hiding.
For metal roof replacement in Tenafly, NJ or nearby towns like Cresskill, Englewood, Englewood Cliffs and Demarest, call (551) 355-3330 to reach a roofer who covers your street.
How the weather here affects roofs around Tenafly
Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, which is how ice dams form and back water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. Most homeowners in Tenafly, NJ have the roof checked in the fall and again after the snow melts.
Why call
Why fix it now
Less damage
Small roof problems caught early usually stay small repairs.
Local knowledge
Roofers in Tenafly know the roof types and weather wear common in local homes.
Know what happens next
Ask the roofer about the cause, the options and the estimate before work starts.
Common questions about metal roof replacement
Is it a good idea to put metal over shingles?
Where code permits, metal can go over a single layer of shingles. It saves tear-off and disposal, but it hides the deck, so the attic should be checked for rot and soft spots first. If the deck is questionable or there are two layers already, a tear-off is the better route.
Is old metal roofing recycled?
Old steel and aluminum panels are routinely taken to a scrap metal recycler. Unlike shingles, which usually go to a landfill, metal is sorted and sent for recycling. Ask the roofer how disposal is handled before work starts.
What is a metal roof retrofit?
A retrofit, or re-cover, installs new metal over the existing panels using a sub-framing system. The method is popular on commercial buildings and large outbuildings. An engineer or roofer confirms the framing can carry the added load.
How is a single metal roof panel replaced?
Single panel replacement is common on exposed fastener roofs. A new panel of matching profile and gauge goes in with fresh sealant and screws. Concealed fastener panels are possible but slower to replace.
When does a metal roof need replacing instead of repair?
The tipping point comes when rust or wear is spread across the roof, not just in a few spots. Rust holes in many panels, a finish worn to bare metal and screw holes that will not hold new fasteners all point toward replacement. A call to (551) 355-3330 is a good way to find out where the roof stands.
More questions? Call (551) 355-3330
Other services that may help
Metal Roof Installation
Choosing and installing a metal roof, from panel type and gauge to underlayment, trim and closures, with high-temperature underlayment and proper flashing.
Learn moreMetal Roof Repair
Repairs for leaking fasteners, open seams, rusted panels and failed flashing on a metal roof, so the panels keep shedding water for years more.
Learn moreRoof Replacement
Full tear-off and replacement for roofs that are worn out, storm beaten or leaking in several places, built to current code from the decking out.
Learn moreStanding Seam Metal Roof
Long-lasting standing seam roofs, from snap-lock to mechanically seamed panels, with matching trim, closures and snow guards.
Learn more
Looking for something else?
See all roofing servicesTalk to a Tenafly roofer about metal roof replacement
Call now for Tenafly metal roof replacement and help in the towns around it.