Local roofersFree to callNo forms to fill out
Serving Tenafly and nearby towns
Menu
Call (551) 355-3330
Cedar Shake Roofing

Cedar Shake Roof Replacement Tenafly, NJ

Replacing a cedar roof in Tenafly starts with removing every old shake and strip of felt interlay, then fixing the boards underneath before the new roof goes on, whether that is new cedar or a different material. Call (551) 355-3330 to reach a local roofer.

Every cedar roof eventually wears past what spot repairs can fix. The shakes erode thinner every year, the butts rot, the nails rust through and the wood turns so brittle that a roofer cannot replace one shake without cracking three more. That is when replacing the roof costs less over time than chasing leaks.

Overlaying cedar shakes with new roofing is not a real option. Shakes are uneven and hold moisture, so anything laid on top sits on a lumpy, damp base, and most codes do not allow roofing over wood shakes. A full tear-off exposes the sheathing for a proper check.

Most cedar roofs sit on spaced sheathing, and that affects every option. If new cedar goes back on, sound spaced boards can stay, but switching to another material means sheathing the roof solid. Rotted boards are replaced either way.

Depending on what the roofer finds, cedar shake roof replacement in Tenafly, NJ can go hand in hand with cedar shake roof installation and cedar shake roof repair.

Looking for Tenafly cedar shake roof replacement? Call (551) 355-3330 and describe the problem to a roofer who works in Tenafly.

Call now
The process

How cedar shake roof replacement works

Here is how a roofer usually handles a full cedar replacement.

  1. Plan the new roof

    The roofer inspects the deck from the attic, measures the roof and talks through new cedar versus synthetic shakes, architectural shingles or metal. Local permits and any material rules are confirmed.

  2. Protect the property

    The crew protects landscaping, siding and windows and sets a dumpster close to the house. Cover stored items in the attic, because old wood roofs shed dust inward.

  3. Tear off to the deck

    Every shake, felt interlay strip, old nail and rusted valley metal comes off, down to bare boards. If an old asphalt layer was ever laid over the cedar, it comes off too.

  4. Sheathing work

    Damaged boards are cut out, and the deck is sheathed solid for asphalt, metal or most synthetic products. This is the step that makes the new roof flat and secure.

  5. Lay underlayment

    Waterproof membrane at the eaves and valleys plus new underlayment protect the house before the finish roof goes on. The dry-in method depends on the new material.

  6. Install the new roof

    The new roof goes on with new valley metal, step flashing, pipe boots and ridge ventilation. A magnetic sweep of the yard and driveway picks up stray nails.

What is included

Parts of a cedar roof replacement

Full tear-off

Every layer comes off with debris hauled away.

Valley metal

Valleys, walls, vents and skylights get new metal for a watertight finish.

Ice barrier

Ice and water membrane goes in at the eaves and valleys where water and ice gather.

Cleanup

Debris is removed daily leaving the property clean.

Deck repair

Damaged sheathing is renewed so fasteners hold firmly.

Related service

Cedar Shingle Roof Replacement Tenafly, NJ

Cedar shingle roof replacement is common on older homes, where sawn shingles were the standard roof long before asphalt. It is common to find original shingles hidden under a later asphalt roof, both of which come off. With everything removed, the boards are checked and repaired or covered with solid sheathing.

Putting cedar shingles back preserves the character of an older house. Some historic districts require it, while others accept materials that imitate wood. Ask a Tenafly roofer to compare new cedar shingles with look-alike options for your home.

Local help

Cedar Shake Roof Replacement Near Me

Many cedar roofs being replaced in Tenafly are the original wood on homes several decades old. Across Tenafly and nearby towns like Cresskill, Englewood, Englewood Cliffs and Demarest, some owners put cedar back to keep the look while others switch to synthetic shakes, architectural shingles or metal, and a roofer can lay out the options side by side.

Searching for cedar shake roof replacement near me from Tenafly or Cresskill, Englewood, Englewood Cliffs and Demarest? Call (551) 355-3330 to talk to a roofer who works in your part of town.

How the weather here affects roofs around Tenafly

Cold winters bring snow, ice and a long stretch of freezing nights. When warm attic air melts the snow, the meltwater runs down and freezes again at the eaves, building ice dams that push water up under the shingles. Strong coastal storms push rain into every weak spot at the flashing and valleys. That is why roof repair in Tenafly is busiest after a hard winter and before the next one.

Why call

Why act early

Drier ceilings

Small roof problems caught early usually stay small repairs.

Local knowledge

Local roofers see the same roofs and storm damage across Tenafly and nearby towns.

Know what happens next

Ask the roofer about the cause, the options and the estimate before work starts.

Common questions about cedar shake roof replacement

Is it worth replacing cedar with cedar?
That comes down to what you want from the roof. Cedar offers real wood character but more upkeep than synthetic or metal options. A roofer can compare samples with you before you decide.
How long does a cedar roof replacement take?
Most homes take several days, with larger or steep roofs taking longer. Removing old wood and adding sheathing take time. The roofer opens only as much roof each day as can be dried in before evening.
What can I replace my cedar shake roof with?
Several materials can replace a cedar roof. Synthetic or composite shakes imitate the look with less upkeep, architectural asphalt shingles cost less and are common, and metal or stone-coated steel lasts a long time. Anything other than cedar typically requires sheathing the roof solid.
Is it okay to roof over a cedar shake roof?
Laying new material over shakes causes more problems than it solves. The old wood stays damp under the new layer and the surface is too uneven to lay flat. A full tear-off is the standard approach.
Do I need new sheathing when replacing a cedar roof?
That depends on what goes back on. If you switch from cedar, the roof will need solid sheathing. Damaged boards always get replaced.

More questions? Call (551) 355-3330

Often needed together

  • Cedar Shake Roof Installation

    Installing cedar shakes or shingles with proper exposure, valleys, ridge caps and ventilation, laid to the slope and climate of the house.

    Learn more
  • Cedar Shake Roof Repair

    Replacing split, cupped or missing shakes, clearing moss and fixing valleys and ridge caps, matched to what a close look at the roof actually finds.

    Learn more
  • Roof Replacement

    Full tear-off and replacement for roofs that are worn out, storm beaten or leaking in several places, built to current code from the decking out.

    Learn more
  • Shingle Roof Replacement

    Replacing an aging shingle roof once repairs no longer hold, including permits, cleanup and a final check.

    Learn more

Looking for something else?

See all roofing services

Talk to a Tenafly roofer about cedar shake roof replacement

Call now for Tenafly cedar shake roof replacement and help in the towns around it.

Talk to a local roofer(551) 355-3330Call now

Free to call. No forms to fill out.

Call (551) 355-3330